|
Elbow 90 Deg 90 degree elbow, also called "90
bends or 90 ells", are manufactured as SR (Short Radius)
elbows and LR (Long Radius) elbows. SR (Short Radius)
elbows have a Center-to-Face dimension of 1.0 X diameter
and are typically used in tight areas where clearances
are an issue. LR (Long Radius) elbows have a
Center-to-Face dimension of 1.5 X diameter and are the
more common type and used when space is available and
flow is more critical.
This is a fitting device which is bent in such a way to
produce 90 degree change in the direction of flow of the
content in the pipe. An Elbow is used to change the
direction in piping and is also sometimes called a
"quarter bend".
A 90 degree elbow attaches readily to plastic, copper,
cast iron, steel and lead. It can also attach to rubber
with stainless steel clamps. Available in many materials
like silicon, rubber compounds, galvanized steel etc,
they connect rigid or IMC circuit together to allow for
90 degree bends.
Our organization is engaged in
offering a quality range of Elbow 90 Deg, which is also
known as 90 bends or 90 ells. We procure our range from
prominent vendors, who ensure to manufacture these in
compliance with international quality standards. These
are categorized into SR (short radius) elbows and LR
(long radius) elbows. The SR elbow is available with a
center-to-face dimension of 1.0 X diameter and mainly
used in tight areas where clearance is required.
Further, our LR elbows have center-to-face dimension of
1.5 X diameter, which is used when space is available
and flow is more critical. These elbow fitting are
generally used to change the direction in piping and are
also known as "quarter bend". Our range of elbow is bent
in a way to create 90-degree change in the direction of
flow of content in the pipe. These are used to connect
hoses to valves, water pressure pumps, and deck drains
forged fittings.
We are the manufacturers, exporters,
suppliers and distributors of 90 Degree Elbow.
Elbow 90 Degree Manufacturers, Elbow 90 Degree
Exporters, Elbow 90 Degree Suppliers, Elbow 90 Degree Distributors. Applications
90 degree elbow find frequent applications are:
The main application area of an elbow (90 degree) is to connect hoses to valves, water pressure pumps, and deck drains. These elbows can be made from tough nylon material or NPT thread.
FEATURES
- A 90 degree elbow is ideal for plastic, copper, cast iron, steel and lead
- It can also be attached to rubber with stainless steel clamps
- It can be made using tough nylon material or NPT thread
- The elbow is available in many material like silicon, rubber compounds and galvanized steel and connects rigid or IMC circuit together to allow for 90 degree bends.
Fitting Size Specifications
The standard specifications of pipe fittings that are globally accepted are Metric and Standard English.
Given below are a variety of choices available according to industry standards and customer advantage.
Metric Sizes
Metric sizes measure in millimeter and vary from as small as 10mm to as large as1000mm.
<10mm
10mm - 20mm
20mm - 30mm
30mm - 40mm
40mm - 50mm
50mm - 100mm
100mm - 200mm
200mm - 500mm
500mm - 1000mm
>1000mm Standard English Sizes MMmET
|
1/8"
|
2"
|
10"
|
26"
|
|
1/4"
|
2 1/2"
|
12"
|
28"
|
|
3/8"
|
3"
|
14"
|
30"
|
|
1/2"
|
3 1/2"
|
16"
|
32"
|
|
3/4"
|
4"
|
18"
|
34"
|
|
1"
|
5"
|
20"
|
36"
|
|
1 1/4"
|
6"
|
22"
|
Other Size <36"
|
|
1 1/2"
|
8"
|
24"
|
Other Size >36"
|
Fitting End Criteria
Pipe Thread - Male
In this category, tapered pipe threads like NPT,
BSPT etc are used which are basically for the
purpose of sealing without gaskets.
Pipe Thread - Female
Pipe Thread - Female is same as Pipe Thread - Male.
Here too, tapered pipe threads such as NPT, BSPT,
etc are used which is specifically for sealing
without gaskets.
Straight Thread -
Male Straight pipe threads such as UNC, UNF, ASME,
etc form Straight Thread - Male.
Straight Thread -
Female Straight Thread - Female also includes
straight pipe threads such as UNC, UNF, ASME, etc.
Plain End
Plain End is used to insert into the bell end of the
connecting pipe.
Bell / Socket / Flare
It is the end length of increased diameter into
which a pipe end can be fitted.
Flange
There are two types of flanges, circular and square.
These are used to connect fitting, typically via
bolting or welding.
Compression Fitting
Compression fitting includes compression nut and ferrule
by which it connects to a mating pipe.
Pipe Clamp End
Pipe Clamp End is designed in such a way so that it is
attached to run on pipe or other fitting.
Barb / Rib
Barbs and ridges comprise fitting ends. They connect
only non-rigid pipe or hose, or sometimes used with a
clamped end.
Groove
Groove is for the installation of a coupling feature such as an o-ring or elastomeric seal.
Features Criteria
Lined Pipe Fittings
In order to protect pipes against the unwanted
deterioration and to enhance the properties of the
fittings, there are a number of lining options that
are avaiable in the market. Lined pipe fittings are
manufactured with an integral lining that are mostly
made from engineered polymers used with process
materials or with other applications like food
processing. It is done taking into consideration the
importance of cleanliness and hygiene factors.
The lining material selected for the service is
generally inert and has suitable and broad
temperature ranges. Most severe service applications
can be handled by using corrosion and abrasion
resistant ceramic materials. Some of the popular
lining products are PP, PVDF, ECTFE, ETFE, PTFE, PFA,
MFA etc.
Plated Pipe Fittings
Pipe fittings are that are plated with different
materials in order to impart the required properties
are called plated pipe fittings. These are mostly
plated with materials such as nickel and chrome.
These platings are used to prevent corrosion and
also to improve the exterior appearance of the pipe.
They also help in increasing the longetivity of the
pipes and it is enhanced significantly if the
plating is done with a durable material of good
quality.
Underground Rated Pipe Fittings
These pipe fittings are designed and constructed for
underground application. Since the application of
these pipes is below the ground, some rules have
been formulated. It is mandatory that underground
piping shall be buried not less than 18 inches below
the surface of the ground unless otherwise
protected, and shall be adequately coated or
otherwise protected against corrosion. Pipe coated
as follows will be considered acceptable if it is:
- Clean and prime.
- Coated with asphalt enamel.
- Wraped with forty-pound felt or Kraft paper.
Though materials like PVC or CPVC can be used, it is
advisable to use ABS as it a heavy-duty plastic pipe
and can successfully meet the requirements of
underground drainage and sewer applications.
|
